Wi-Fi radio signals are found in 25 percent of homes worldwide, so Karl Woodbridge and Kevin Chetty, researchers at University College London, designed their detector to use these ubiquitous signals. When a radio wave reflects off a moving object, its frequency changes-a phenomenon called the Doppler effect. Their radar prototype identifies frequency changes to detect moving objects. It's about the size of a suitcase and contains a radio receiver composed of two antennas and a signal-processing unit. In tests, they have used it to determine a person's location, speed and direction-even through a 30cm thick brick wall. Because the device itself doesn't emit any radio waves, it can't be detected.
Wi-Fi radar could have domestic applications ranging from spotting intruders to unobtrusively monitoring children or the elderly. It could also have military uses: The U.K. Ministry of Defence has funded a study to determine whether it could be used to scan buildings during urban warfare. With improvements, Woodbridge says, the device could become sensitive enough to pick up on subtle motions the ribcage makes during breathing, which would allow the radar to detect people who are standing or sitting still.
See image above for how it'll work.
1. MOVING SUBJECT
When Wi-Fi radio waves bounce off a moving object, their frequency changes. If, for example, a person is moving toward the Wi-Fi source, the reflected waves' frequency increases. If a person is moving away from the source, the frequency decreases.
2. REGULAR OL' ROUTER
A Wi-Fi Internet router already in the room fills the area with radio waves of a specific frequency, usually 2.4 or 5 gigahertz.
3. BASELINE SIGNAL
One antenna of the radar system tracks the baseline radio signal in the room.
4. SHIFTED SIGNAL
A second antenna detects radio waves that have reflected off of moving objects, which changes their frequency.
5. PERP, SPOTTED
By comparing the two antennas' signals, the computer calculates the object's location to within a few feet as well as its speed and direction.
BREATHE EASY
It's possible to detect a person's breathing rate by surrounding him with radio waves. Neal Patwari's wireless engineering group at the University of Utah designed a network of 20 inexpensive radio transmitters that are placed around a patient's bed. Then they created an algorithm that detects a stationary person's breaths better than current detectors do. Patwari plans to upgrade the algorithm by the end of the year to filter out body movements too. The system could someday be used in hospitals in place of tubes and masks.
-Elbert Chu